See who is exhibiting or create your own watch list. Use the filter options to obtain a list of exhibitors for the respective product group.
DIAMANT Polymer GmbH
DIAMANT Polymer GmbH
Marie-Bernays-Ring 3a
41199 Mönchengladbach
Germany
Telephone+49 2166 98360
About us
Diamant Polymer GmbH – Innovative Sealing Solutions for Additive Manufacturing
Diamant Polymer GmbH has been developing and producing high-performance polymer solutions for industrial applications for decades. Our core expertise lies in highly filled high-performance polymer systems and low-viscosity, capillary-active sealers that reliably close porosity and make parts impermeable to liquids and gases. With this technology, we unlock new opportunities for additive manufacturing: targeted sealing not only improves quality and functionality, but also increases cost efficiency – for example by enabling lighter structures, reducing material consumption and shortening printing times.
At Formnext, we will present sealing solutions specifically developed for 3D printing, designed to make additively manufactured components market-ready and durable. Our mission: to support service providers and distributors in reliably sealing, functionalizing and economically optimizing printed parts.
Sealing Solutions for Additive Manufacturing
Our product portfolio includes:
Surface Sealers – low-viscosity, capillary-active systems that deeply penetrate pores, close porosity and ensure long-term tightness, even under demanding fluid or gas loads.
Functional Sealers – sealers that can be enhanced with additives such as UV protection, electrical conductivity, or improved chemical resistance, enabling targeted functionalization of 3D-printed parts.
Repair & Gap-Filling Systems – polymer systems for repairing, filling and reworking printed parts, helping to reduce scrap and improve efficiency.
Customized Solutions – tailored sealing systems developed to meet the specific requirements of our partners and their end customers.
Application Examples
Our sealing technology is already successfully used in a wide range of additive manufacturing applications:
Fluid channels and valves: Sealed parts remain leak-tight, even under pressure.
Outdoor housings: UV-stable sealers provide reliable protection against weathering and extend service life.
Underwater drones and marine applications: Sealed components remain liquid- and gas-tight – even during continuous underwater operation.
Eyewear frames: Sealers with UV protection and surface refinement enable attractive, durable and long-lasting designs.
Large-scale parts for the oil and gas industry: Increased chemical resistance, tightness and durability under extreme conditions.
Benefits for Distributors and Service Providers
Portfolio expansion: Offer customers clear added value with sealing and functionalization solutions for additive manufacturing.
Ease of use: Our sealers are designed for practical application and can be easily integrated into existing production and post-processing workflows.
Cost efficiency: Save printing material and time by producing thinner, lighter structures that become tight and functional through sealing.
Reliability: Decades of expertise, proven quality and secure supply chains from a trusted German manufacturer.
Partnering Opportunities
At Formnext we are particularly looking to connect with:
Distributors of 3D printing materials, systems and accessories interested in expanding their portfolio with innovative sealing solutions.
Additive manufacturing service providers who want to seal, functionalize and enhance their parts to access new markets.
Together, we develop strategies to make 3D printing not only faster and more precise, but above all tighter, more durable and more economical.
About Diamant Polymer GmbH
Based in Mönchengladbach, Germany, Diamant Polymer GmbH has stood for innovation, quality and customer proximity for more than 130 years. Rooted in polymer chemistry, our focus is firmly set on the future: additive manufacturing is one of our key growth fields, where we apply and expand our expertise.
Our promise: We make 3D-printed parts tight – and better.
Meet us at Formnext – and discover how additively manufactured components become truly market-ready products.
Keywords
- UV protection
- Porosity sealing
- Diamant Polymer GmbH
- dichtol
- Watertight
- post-processing
- sealing solutions
Our Products
dichtol AM Hydro
dichtol AM Hydro is a ready-to-use polymer system for sealing additive manufactured components. The water-based sealer is a non-hazardous substance and is therefore particularly user-friendly. The sealer can be used to seal additive manufactured components against various liquids and gases and protect them from environmental influences. The sealer can be used for all common printing processes and printing materials.
- For fine pores (smaller than 0.2 mm)
- Water-based, VOC-free
- Good solvent resistance
- Surface dry after 60 minutes
dichtol AM UV Protection
dichtol AM UV Protection is a very low-viscosity, polymer-based impregnating agent for additively manufactured components. The product seals additively manufactured components gas- and liquid-tight and protects the component from UV radiation. This is made possible by a very thin protective layer of a few micrometers, which wraps around the particles and absorbs the harmful UV rays. dichtol AM UV protection seals and protects the component and can thus prevent discoloration of SLS printed polyamide (PA) components such as spectacle frames, for example.
- For larger pores (0.1 – 0.5 mm)
- Sealing + UV protection
- Contains organic solvents
- Surface dry after 6 minutes
Properties
- Efficient material consumption
- Wide range of applications through: dipping, brushing, injecting
- Temporary corrosion protection (transport protection)
- UV resistance for 3D printed parts (independent of the printing process)
- Temperature resistance up to +200°C
- PMMA base with good recoatability
- Fast curing at room temperature / no tempering or heating required
- Very good penetration behavior / depth effect for sealing against gas and liquid
Typical applications
- Capillary-active deep impregnation of micropores, hairline cracks and porosities
- Selective serial impregnation
- Individual impregnation (of large components)
- Impregnation of rapid prototyping and additive manufacturing components
- Sealing of porous graphite and ceramic components
- Protection of surfaces against UV radiation
dichtol AM
dichtol AM is a very low-viscosity, high-performance polymer for infiltrating, impregnating and sealing porous structures, layers and components. dichtol AM penetrates porous structures and cracks independently and seals them permanently and reliably. The product has a very high capillary activity and cures without the addition of heat under ambient conditions. It is applied atmospherically, i.e. without vacuum or pressure. The cured polymer fills the open pores or cracks and has good resistance to oils, lubricants and coolants.
- For fine pores (smaller than 0.1 mm)
- Contains organic solvents
- High temperature resistance (300°C)
- Surface dry after 6 minutes
Properties
- Efficient material consumption through selective application even with vagabond porosities
- Versatile application options through dipping, injecting, spraying or brushing
- Good chemical resistance
- Temperature resistant up to + 300°C
- Drinking water approval
Typical applications
- Capillary-active deep impregnation of micropores, hairline cracks and porosities
- Selective serial impregnation
- Individual impregnation (of large components)
- Impregnation of rapid prototyping and additive manufacturing components
CleanBed Pro
Clean Bed Pro – 99% isopropanol for cleaning 3D printing bed surfaces (500 ml with spray head)
A clean printing bed surface is crucial for optimal adhesion during 3D printing. Clean Bed Pro effectively removes adhesive residue, dust, skin oils and other residues – without any aggressive additives. The high-purity isopropanol (99%) works purely physically:
- Contaminants are dissolved and evaporate without leaving any residue
- No water
- No fragrance
- No additives – just reliable cleaning
Thanks to the spray head included, Clean Bed Pro can be applied conveniently and precisely. The liquid dries quickly and is ideal for glass, PEI, BuildTak and many other print bed surfaces. 💡
Note: Clean Bed Pro is not a biocidal product. It is used exclusively for physical cleaning and has no disinfecting or germicidal effect.
Application: Spray sparingly onto a cold print bed, leave to take effect for a short time and wipe dry with a lint-free cloth.
Contents: 500 ml
Active ingredient: Isopropanol 99%
Scope of delivery: Bottle + separate spray head
dichtol AM Makro
dichtol AM Makro is a very low-viscosity, high-performance polymer for infiltrating, impregnating and sealing porous structures, layers and components. dichtol AM penetrates porous structures and cracks independently and seals them permanently and reliably. The product has a very high capillary activity and cures without the addition of heat under ambient conditions. It is applied atmospherically, i.e. without vacuum or pressure. The cured polymer fills the open pores or cracks and has good resistance to oils, lubricants and coolants.
- For large pores (0,1-0,5 mm)
- Contains organic solvents
- High temperature resistance (300°C)
- Surface dry after 6 minutes
Properties
- Efficient material consumption through selective application even with vagabond porosities
- Versatile application options through dipping, injecting, spraying or brushing
- Good chemical resistance
- Temperature resistant up to + 300°C
- Drinking water approval
Typical applications
- Capillary-active deep impregnation of micropores, hairline cracks and porosities
- Selective serial impregnation
- Individual impregnation (of large components)
- Impregnation of rapid prototyping and additive manufacturing components